 | |  | |  | |  | |  |
Pacific Valve Ming Da MC 3008-2A
Product Details
A true state-of-the-art amplifier, the Ming Da MC 3008 2A brings a robust quality design with SET
sound. A 300B tube drives an 805 for 40 watts of clean SET power. These well constructed and
beefy mono blocks weigh in at 50 lbs a piece and are shipped in three large cartons. The front panel
sports volume control and blue power indicator light. On the left side panel is an on/off switch and a
switch that lets you choose between 2A3 and 300B drivers. Pacific Valve orders these with 300B
tubes. On the right side panel is a an input if the mono block is to be used as a power amp along with
a switch to use the mono block as a “straight in” basic amplifier. The rear of the unit features the IEC
inlet, 4 and 8-ohm speaker outputs, gold-plated source RCA input for preamp / power amp operation
plus a pair of preamp inserts for basic amp operation. Point-to-point wiring, ¼” black steel chassis,
hand-wound transformers, ALPS potentiometer, Solen caps, 1 X 300B, 1 x 12AU7s and 1 x 12AX7
complete the parts list. Dimensions are 50.5 X 24.5 X 29 cm
It is not difficult to describe the sound of the high powered Ming Da MC 3008-A. Music just emerges
without effort. Performers and instruments become startlingly real and palpable. The Ming Da MC
3008-A uses the 805, a big radio transmitter tube. When this is combined with the 300B, you get the
best of both worlds -- i.e. the purity, immediacy and low-level detail retrieval of micro power SETs with
the greater output power and speaker compatibility of push-pull designs. In the Ming DA MC 3008-A
the 805 provides the juice while the 300B offers its usual rep for midrange magic.
The Ming DA MC 3008-A is a rugged and user-friendly amplifier. Connect a preamp to the Ming DA
MC 3008-A or use the built in preamp if you only have a single source and switch between the two
with the preamp / power amp switch. Whatever the application, the Ming DA MC 3008-A is a major
breakthrough in musical transparency and SET design at an incredible price point and represent
great value for the money.
sound. A 300B tube drives an 805 for 40 watts of clean SET power. These well constructed and
beefy mono blocks weigh in at 50 lbs a piece and are shipped in three large cartons. The front panel
sports volume control and blue power indicator light. On the left side panel is an on/off switch and a
switch that lets you choose between 2A3 and 300B drivers. Pacific Valve orders these with 300B
tubes. On the right side panel is a an input if the mono block is to be used as a power amp along with
a switch to use the mono block as a “straight in” basic amplifier. The rear of the unit features the IEC
inlet, 4 and 8-ohm speaker outputs, gold-plated source RCA input for preamp / power amp operation
plus a pair of preamp inserts for basic amp operation. Point-to-point wiring, ¼” black steel chassis,
hand-wound transformers, ALPS potentiometer, Solen caps, 1 X 300B, 1 x 12AU7s and 1 x 12AX7
complete the parts list. Dimensions are 50.5 X 24.5 X 29 cm
It is not difficult to describe the sound of the high powered Ming Da MC 3008-A. Music just emerges
without effort. Performers and instruments become startlingly real and palpable. The Ming Da MC
3008-A uses the 805, a big radio transmitter tube. When this is combined with the 300B, you get the
best of both worlds -- i.e. the purity, immediacy and low-level detail retrieval of micro power SETs with
the greater output power and speaker compatibility of push-pull designs. In the Ming DA MC 3008-A
the 805 provides the juice while the 300B offers its usual rep for midrange magic.
The Ming DA MC 3008-A is a rugged and user-friendly amplifier. Connect a preamp to the Ming DA
MC 3008-A or use the built in preamp if you only have a single source and switch between the two
with the preamp / power amp switch. Whatever the application, the Ming DA MC 3008-A is a major
breakthrough in musical transparency and SET design at an incredible price point and represent
great value for the money.
| Features |
Specifications
Maximum Output: 40W
Output Impedance: 4Ω 8Ω
Input Level: 100mv
Input Impedance： 100k
Total Harmonic Distortion: 1%
Frequency Response: 18Hz-30KHz±1dB
Signal to Noise Ratio: 98dB
Input Jacks: 1 group, Output Jacks: 2 groups
Vacuum Tubes: 805×1 300Bx1 12AU7×1 12AX7x1
Power Consumption: 205W
Power Supply Voltage: AC110V/220V 50Hz/60Hz
Weight: 30Kg/pc
Output Impedance: 4Ω 8Ω
Input Level: 100mv
Input Impedance： 100k
Total Harmonic Distortion: 1%
Frequency Response: 18Hz-30KHz±1dB
Signal to Noise Ratio: 98dB
Input Jacks: 1 group, Output Jacks: 2 groups
Vacuum Tubes: 805×1 300Bx1 12AU7×1 12AX7x1
Power Consumption: 205W
Power Supply Voltage: AC110V/220V 50Hz/60Hz
Weight: 30Kg/pc
Details
Caution! Be aware of "fake" or "pirated"
versions (A pirated version is where parts are
removed and lower quality parts are
substituted.) of Ming Da MC 3008 on the
Internet. This is the MC 3008-2A model
available only through Pacific Valve. The
Ming DA MC 3008 comes with all tubes
shown in 300B mode, power cords, user
manual and ships from Chicago, IL.
versions (A pirated version is where parts are
removed and lower quality parts are
substituted.) of Ming Da MC 3008 on the
Internet. This is the MC 3008-2A model
available only through Pacific Valve. The
Ming DA MC 3008 comes with all tubes
shown in 300B mode, power cords, user
manual and ships from Chicago, IL.
Gallery
Click on the image to enlarge
Watch the Video
Around The World
The Ming Da MC 3008 A is well known on the web
| Sales & Customer Service 1 - 888 - 329 -1337 |
Pacific Valve
Bringing Value to the Audiophile Since 2003
 | |  | |  | |  | |  | |  | |  | |  | |  |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
All Pacific
Valve Videos
are also
available on
Valve Videos
are also
available on
